 The M98 Filter Set removes toxic chemical and biological warfare agents in gaseous (vapor) and aerosol (particulate) forms from the airstream. - 200-cfm rated airflow
- ASZM-TEDA carbon
- Radial configuration
- Horizontal and vertical installation
- Modular configurations allow for multiple filter installation
The M98, 200-cfm CBRN filter set removes toxic gases and particulates to provide purified air for a variety of applications, including mobile shelters, vehicles and ship-borne collective protection systems. The M98 filter set is ideal for all medium airflow requirements and can also be applied to higher airflow applications such as building protection. Multiple M98 filter sets can be combined to create 400-cfm and up to 2200-cfm on a single filter unit, and multiples of these units can be employed to accommodate even larger airflow requirements. HDT has designed, built and deployed several large collective protection systems, which employ as many as 200 M98 filter sets per installation. The M98 filter sets are used on the military M84, M95 and M96 filtration systems, as well as HDT's FFA series of collective protection systems and Multiple Cell Radial Filter (MCRF) housings used by the U.S. Air Force and the U.S. Army for building protection and other transportable shelters. The M98 system is used in applications utilizing a version of this filter encased in a hermitically sealed canister (HSFC). HDT's M98 filter sets are designed and tested to provide protection from all known chemical and biological agents. | Ordering information | HDT part number: 5-19-6722-N
National stock number: 4240-01-369-6533 | | Rated airflow | 200-cfm, 340 m3/h | | Airflow resistance | See individual component filter | Physical characteristics:
Gas filter:
Length
Inside diameter
Outside diameter
Weight
Particulate filter:
Length
Inside diameter
Outside diameter
Weight |
10.20" (10.81" with gaskets fully expended)
16.69"
21.43"
35.5 lbs. (approximately)
10"
12"
16.6"
7.75 lbs. | | Housing material | Gas filter - aluminum
Particulate - stainless steel/aluminum | Filter element:
Gas filter:
Airflow resistance
Carbon type
Carbon density
Particulate filter:
Airflow resistance
Particle efficiency
Particulate/gas filter:
DMMP CT value (minimum - new)
CK CT value (minimum - new) |
4.5 IWG 1119 Pa (maximum new)
12 x 30 ASZM-TEDA
0.65 g/ml (approximately)
1.0 IWG 498 Pa (maximum new)
99.97% (@0.3 micron and rated flow)
300,000 mg x min / m3
110,000 mg x min / m3 | * Weight may vary slightly due to carbon density and certain other factors.
| |
