 Portable, lightweight and versatile in design, HDT's F100-60K, a commercially available Environmental Control Unit (ECU), produces 60,000 BTU/hr of cooled or heated air for larger military tents or shelters.
- 60,000 BTU/hr cooling at an outside ambient temperature of 125°F
- Energy-efficient, Copeland Scroll™ compressor
- R-410A high-efficiency refrigerant system
- 10-kW electric heater
- Lightweight design, 500 lbs. (200 lbs. lighter than competitive systems)
- Low power consumption
- Low noise level, 75 dBA
A The F100-60K delivers 60,000 BTU/hr of air conditioning and is capable of providing heat when required. It is designed to be used outside a tent or shelter and can either be positioned on the ground or mounted on a trailer for increased portability. The unit connects to the tent or structure with flexible ducts attached to both the inlet and outlet of the evaporator.
The F100-60K has two 16-inch diameter, 6-foot inlet and outlet airflow ducts attached to either side of the control panel. Both ducts are constructed with a non-permeable, coated outer material with a 6-inch helical stiffener pitch. The duct material is designed to remain flexible during operation in temperatures ranging from -50°F to 125°F. Both the inlet and outlet ducts are stored on board and designed for easy setup during cold operation. It also incorporates a 25-foot power cable and a 15-foot condensate drain hose.
| Cooling capacity |
With air entering the evaporator @ 90°F (32°C) dry bulb/ 75°F (23.8°C) wet bulb, 125°F (51.6°C) dry bulb outside ambient |
60,000 BTU/hr total sensible/latent (19.33kW) total sensible/latent |
| Heating capacity (optional) |
|
10kW (34,140 BTU/hr) |
Airflow
|
Evaporator with supply-air and return-air ducts installed |
2,000 SCFM @ 1.00" WC external
3398 m3h @ 25mm WC external |
| |
|
6,000 SCFM (10,195 m3h ) |
| Sound power |
1m from condenser fan outlet. |
< 76 dbA @ 1m |
| Operating temperature range |
Cooling
Heating |
40° to >125°F (4.4° to >51.6°C)
-50° to +70°F (-45° to + 21°C) |
| Storage temperature |
|
-60° to +160°F (-51° to +71°C) |
| Physical characteristics |
Frame |
Aluminum, corrosion-resistant, riveted, space frame structural design |
| |
Weight |
550lbs (249kg)
With: supply-air & return-air ducts,
25' (7.6m) power word, 15' (4.5) drain hose |
| |
Supply-air and return-air ducts |
Qty. (2) 16" (406mm) diameter x 6' (1.82m) long Color: Desert Tan
(Transport storage located inside the ECU) |
| |
Evaporator blower wheel |
Backward incline impeller, sea water & vibration-resistant welded aluminum impeller; taper-lock hub bushing |
| |
Evaporator blower motor |
2hp motor, NEMA 56 frame, TEFC, 4 pole, wash-down duty, 65°C Amb. |
| |
Condenser fan type |
Motorized, axial fan, advanced low-noise die-cast aluminum blades, motor IP 54 enclosure, 70°C Amb., 2-speed for low-ambient operation, sea water, hot climate protection, transit duty maintenance-free, sealed ball bearing, fully guarded, transit duty construction. |
| |
Compressor |
Copeland Scroll™ compressor |
| |
Evaporator coil |
Fin-tube design- .006" thick. Aluminum fins, 3/8 CU tubes, corrosion-coated satin black dip |
| |
Condenser coil |
Micro-channel design: lightweight all-aluminum construction, extra-large face area to assure reliable operation during high-ambient operations, wide fins per inch fin spacing, allowing sand, dust and organic materials to pass through the coil
(Optional: baked-on Epoxy-E coat finish for corrosion protection) |
| |
Refrigerant |
HFC-410A (optional HFC-407C) |
| |
Refrigerant charge |
5 lbs. (2.26kg) |
| Electrical characteristics |
Voltage |
208VAC , +10%/-5% |
| |
Phase |
3 |
| |
Frequency |
50/60 Hz |
| |
A/C current |
45 amps |
| |
Heat current |
35 amps |
| |
Main circuit breaker |
60A |
| |
Control circuit breaker |
1A |
| |
Power cable and connector |
25' (7.6m) long, 5-wire, with connector MS90556C32412P
(Transport storage located inside ECU) |
|
|
